30 lines
1.1 KiB
Markdown
30 lines
1.1 KiB
Markdown
# Connecting to Gadgetbridge
|
|
|
|
Launch Gadgetbridge and tap on the **"+"** button on the bottom right to add a new device:
|
|
|
|
![Gadgetbridge 0](gadgetbridge0.jpg)
|
|
|
|
Wait for the scan to complete, your PineTime should be detected:
|
|
|
|
![Gadgetbridge 1](gadgetbridge1.jpg)
|
|
|
|
Tap on it. Gadgdetbridge will pair and connect to your device:
|
|
|
|
![Gadgetbridge 2](gadgetbridge2.jpg)
|
|
|
|
# Updating with Gadgetbridge
|
|
|
|
Now that Gadgetbridge is connected to your PineTime, use a file browser application and find the DFU file (`pinetime-mcuboot-app-dfu-x.x.x.zip`) you downloaded previously. Tap on it and open it using the Gadgetbridge application/firmware installer:
|
|
|
|
![Gadgetbridge 3](gadgetbridge3.jpg)
|
|
|
|
Read the warning carefully and tap **Install**:
|
|
|
|
![Gadgetbridge 4](gadgetbridge4.jpg)
|
|
|
|
Wait for the transfer to finish. Your PineTime should reset and reboot with the new version of InfiniTime!
|
|
|
|
Don't forget to **validate** your firmware. In the InfiniTime go to the settings (swipe right, select gear icon) and Firmware option and click **validate**. Otherwise after reboot the previous firmware will be used.
|
|
|
|
![Gadgetbridge 5](gadgetbridge5.jpg)
|